Linux 'make' Command Explained With Examples

How to install any QT-Wallet on the Raspberry Pi / Pi3B+

Hello and welcome to my first tutorial. Today I will show you how to install almost any QT-wallet on the RaspberryPi. I hope this tutorial will help you. I use the BankSocietyCoin in this tutorial, you can change it also to your fav. Coin.

Install Raspbian , *Buster produced a lot of failures on my system while compiling Wallets*
(my version: https://downloads.raspberrypi.org/raspbian/images/raspbian-2018-03-14/ )
Run the following commands:

Change Swap Size of the Rasp:

sudo nano /etc/dphys-swapfile
change to CONF_SWAPSIZE=2048
press: ctrl o Enter and ctrl x
enable the swap file with its new size:
sudo dphys-swapfile setup
sudo dphys-swapfile swapon
----------
Install Required Dependencies:

apt-get update
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev
and
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++-dev libminiupnpc-dev qt5-default
----------
Install bitcoin PPA files for the compiling process:

cd /etc/apt/sources.list.d/
sudo nano bitcoin.list
paste to following line:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main
press: ctrl o Enter and ctrl x
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E
sudo apt-get update
----------
Install working libssl:

cd && sudo apt-get remove libssl-dev
sudo nano /etc/apt/sources.list
change stretch to jessie
press: ctrl o Enter and ctrl x
sudo apt-get update
sudo apt-get install libssl-dev
sudo apt-mark hold libssl-dev
sudo apt-mark hold libssl1.0.0
sudo nano /etc/apt/sources.list
Change jessie" back to stretch
press: ctrl o Enter and ctrl x
sudo apt-get update
----------

Compile and Install BerkeleyDB 4.8.30 :

wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz
sudo tar -xzvf db-4.8.30.NC.tar.gz
cd db-4.8.30.NC/build_unix
sudo ../dist/configure --enable-cxx
sudo make
sudo make install
export CPATH="/uslocal/BerkeleyDB.4.8/include"
export LIBRARY_PATH="/uslocal/BerkeleyDB.4.8/lib"
----------

The wallet:

(my way) mkdir wallets , cd wallets
git clone https://github.com/RGPickles/BankSocietyCoin
cd BankSocietyCoin
chmod 755 src/leveldb/build_detect_platform
chmod 755 src/secp256k1/autogen.sh
cd src/
make -f makefile.unix
./societyd
* for qt wallet*
cd ..
qmake
make
edit society.conf in .society
(rpcuser=SomeCoolRandomUsername
rpcpassword=SOMETHINawesomeYOUdontHaveToRemember
rpcconnect=127.0.0.1
save.
./society-qt
----------

Have fun!
for a Beer - Donations ;)
SOCI - Si6V7EwnJqzmFiNGHSbXrtWUXKH6F4EFm3
BTC - 1HpGF4wMzztpJ4KT4o2ySFvnLJ4gCoYaV5
LTC - LS22MgY9G4KbaKhkR5dFi995MbcQhuyDXW
ETH - 0x6b5EdC3e58Fd84a40aa942964690adA91C398075
TRX - TKBpktt5QQ9WV57QjonQrGr1vmKLCVQBL6

13.07.2019 DennisHilk




**********
if error (makefile.unix:200: obj/rpcclient.o] appears)
[This first step is necessary because you will get linking errors if you don't remove the old Boost library]
sudo apt remove --purge --auto-remove libboost-dev libboost-thread-dev libboost-system-dev libboost-atomic-dev libboost-regex-dev libboost-chrono-dev
mkdir boost
cd boost
wget https://dl.bintray.com/boostorg/release/1.64.0/source/boost_1_64_0.tar.gz
tar xfz boost_1_64_0.tar.gz (can take rly long, dont worry)
cd boost_1_64_0/
./bootstrap.sh
./b2 stage threading=multi link=static --with-thread --with-system
sudo ./b2 install threading=multi link=static --with-thread --with-system
cd ../../
nano .bash_profile
export LIBS="-L/home/YOURS/boost/boost_1_64_0/stage/lib"
export CPPFLAGS="-I/home/YOURS/boost/boost_1_64_0"
cd society root
make clean
cd src
sudo make -f makefile.unix

(if bignum error)
sudo apt-get install libgmp-dev
or delete opensll and reinstall as above.
submitted by dennishilk to u/dennishilk [link] [comments]

Help please, Staking reddcoin on Raspberry Pi (Raspbian Stretch with desktop)

Hello,
I could really use some help setting up a reddcoin wallet on the Raspberry pi. I've tried executing the following 2 guides, but unfortunatly they keep giving me errors. Guide1: https://www.reddit.com/reddCoin/comments/2b8wqm/tutorial_compiling_and_running_the_reddcoin/ Guide2: http://d-lindemann.de/2017/09/reddcoin-staking-mit-raspberry-pi/
instead of using the recommended "Raspbian (Debian Wheezy). The image file name is 2014-06-20-wheezy-raspbian.img." i'm using the latest " Raspbian Stretch with desktop Image with desktop based on Debian Stretch Version: November 2017 Release date: 2017-11-29 Kernel version: 4.9"
Also instead of using Reddcoin v1.3.1.2 i decided to go with the* Reddcoin V2.0.0.0 (latest version todate)*
every step untill step 6 seems to work fine, but then after executing command: make -f makefile.unix" the following error message appears:
make: makefile.unix: No such file or directory make: *** No rule to make target 'makefile.unix'. Stop.
researching that issue led me to abandon the guide1 and move to a more recent version of a guide. https://github.com/joroob/reddcoin/blob/mastedoc/rasp-tut.md following those steps lead to a bignum error at 6.3 after excecuting commands
cd src (to take me to reddcoin/src) make (to start compiling i assume)
the bignum error i'm experiencing now seems to be described very well here: https://github.com/reddcoin-project/reddcoin/issues/103 In there i excecuted the following commands to see if my dependencies were correct.
sudo apt-get build-essential   sudo apt-get install build-essential   sudo apt-get install libtool autotools-dev autoconf   sudo apt-get install libssl-dev   sudo apt-get install libboost-all-dev   sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install db4.8 sudo apt-get install libdb4.8-dev sudo apt-get install libdb4.8++-dev sudo apt-get install libminiupnpc-dev sudo apt-get install libqt4-dev libprotobuf-dev protobuf-compiler sudo apt-get install libqrencode-dev cd reddcoin .>/autogen.sh ./configure make
However this did not seem to clear my issue. reading on they talk about it being an issue with libssl in debian 9. with the following link. (at this point i'm noticing how the further i go, the less ground is beneath me to stand on.. and i'm not a good swimmer in unix).
anyways final post there says the following code should fix it: https://github.com/peercoin/peercoin/commit/5b09830e5de0f5105534e69dbf4acffb3255869b But what do i do with this link i have no idea. and that's kinda where my progress halts as i cannot for the life of me find out what to do next to troubleshoot this issue.
So TL:DR I'm trying to use the make command in ~/reddcoin/src however it's giving me BIGNUM errors preventing me from making progress.
I'm using PI model B+, Raspbian stretch latest version plz halp...
submitted by FloydStash to reddCoin [link] [comments]

DECENT MINING SETUP & RESSOURCES SHORTCUT

To all DECENTants,
I would like to encourage you to become a seeder or witness (actually not miner) on DECENT.

SHORT INTRODUCTION ABOUT ME

As a pioneer with Bitcoin I truly believed in the DCT project and it's proposal. The first day of the ICO release I sent all my BTC balance to the DECENT. Not knowing when and what they will deliver. To participate in this great adventure means a lot to me. Another project from my home country I strongly encourage you to get familiar with is Ethereum. I have been an early CPU miner: before Crypto Currency I used to compute for sience projects grid for Clean Water and Cancer Research. If I hadn't bought Rainforest with the Ripple they distributed to all contributors, I'd be a rich man today. :P

DECENT SUPPORT

https://decent.ladesk.com/

DECENT WIKI

https://wiki.decent.ch/doku.php?id=decent:howto#build_decent_from_source

DECENT GITHUB

https://github.com/DECENTfoundation/DECENT-Network

BLOCK EXPLORER

https://explorer.decent.ch/

DECENT DB

https://decent-db.com/

GRAPHENE CLI Wallet Cookbook

https://github.com/bitshares/bitshares-core/wiki/CLI-Wallet-Cookbook

RESSOURCES

https://www.digitalocean.com/community/tutorials/initial-server-setup-with-ubuntu-16-04
http://www.hamvocke.com/blog/a-quick-and-easy-guide-to-tmux/
https://digitizor.com/create-swap-file-ubuntu-linux/

I - SERVER SETUP

A dedicated server with Linux Ubuntu 16.04 LTS is most recommend for 24/7 operation. I suggest you close the root and create a new user with SSH Key, secure the system with a firewall.

1. Create a new user

adduser bob 

2. Elevate him

usermod -aG sudo bob 

3. Generate a new keyset

ssh-keygen 

4- Bind the new keys

ssh-copy-id [email protected]_server_ip 
Copy the keys to your local drive. You'll need them to connect.

5. Change the config file

sudo nano /etc/ssh/sshd_config 
Change Line PasswordAuthentication no

6. Finish with

sudo systemctl reload sshd 

7. Login with your ssh key, user and password

ssh [email protected]_server_ip 

II - PREREQUISITES

1. Grab your tools

sudo apt-get update sudo apt-get install build-essential autotools-dev automake autoconf libtool make cmake checkinstall realpath gcc g++ flex bison doxygen gettext git qt5-default libqt5svg5-dev libreadline-dev libcrypto++-dev libgmp-dev libdb-dev libdb++-dev libssl-dev libncurses5-dev libboost-all-dev libcurl4-openssl-dev python-dev libicu-dev libbz2-dev 

2. Download and build Boost 1.60.0

mkdir -p ~/dev/DECENTfoundation/DECENT-Network-third-party cd ~/dev/DECENTfoundation/DECENT-Network-third-party rm -rf boost_1_60_0* boost-1.60.0* wget https://sourceforge.net/projects/boost/files/boost/1.60.0/boost_1_60_0.tar.gz tar xvf boost_1_60_0.tar.gz mkdir boost-1.60.0_prefix cd boost_1_60_0 export BOOST_ROOT=$(realpath ../boost-1.60.0_prefix) ./bootstrap.sh --prefix=$BOOST_ROOT ./b2 install cd .. rm -rf boost_1_60_0 boost_1_60_0.tar.gz 

III - INSTALLATION

1. Clone the repo

mkdir -p ~/dev/DECENTfoundation cd ~/dev/DECENTfoundation #via ssh $ git clone [email protected]:DECENTfoundation/DECENT-Network.git #via url $ git clone https://github.com/DECENTfoundation/DECENT-Network.git cd DECENT-Network git submodule update --init --recursive 

2. Build and install Decent

mkdir -p ~/dev/DECENTfoundation/DECENT-Network-build cd ~/dev/DECENTfoundation/DECENT-Network-build cmake -G "Unix Makefiles" -D CMAKE_BUILD_TYPE=Debug ~/dev/DECENTfoundation/DECENT-Network cmake --build . --target all -- -j -l 3.0 cmake --build . --target install 

IV - USE DECENT

You don't want your server to shut down the process when you lose connection or quit.
I use tmux. Though nohup is sufficient for infrequent access. Use it when you fire up decentd after miner setup.
nohup ./decentd & disown 

1. RUN decentd - On first run decentd will create .decent in the home directory.

~/dev/DECENTfoundation/DECENT-Network-build/artifacts/prefix/bin/decentd 
Always close it via Ctrl+C to save the current state Ctrl+S Freeze Ctrl+Q Resume

2. Get HELP

cd ~/dev/DECENTfoundation/DECENT-Network-build/artifacts/prefix/bin/ ./decentd -h 

3. RUN cli_wallet

~/dev/DECENTfoundation/DECENT-Network-build/artifacts/prefix/bin/cli_wallet 
Close it with Ctrl+D

4. USE cli_wallet

set_password xy unlock xy 

5. IMPORT your account

import_key decentgo_username your_private_key 

6. CREATE 3 sets of keys for your new account

suggest_brain_key 
write them down, don't use the ones below. ;)

1. new owner key

{ "brain_priv_key1": "UNBUSH ROAR CHKALIK STRUE PLATTEN DEMOB COLETIT DECAYER SPERONE SPASMED ANATASE LAGGARD BESPETE AXOID SERAL CHEKI", "wif_priv_key1": "5J4brX9bydADigEtsXZhCZ1YLVXkq8frp4xcKAREQ3Gh3P2DE7e", "pub_key1": "DCT5VNJni7HypYi159qiwazZ1WZUt4p2v7NLQmFCJPDvjBpW2oG8a" } 

2. new active key

{ "brain_priv_key2": "FUSION BLART JAIL FESTAL LAXNESS ROSTEL TITI VANADYL PUG BATATA KAIK ROSETY STUCCO TETE BEMUDDY WUDGE", "wif_priv_key2": "5HvsjRsokHSeeUdRkM88JgLzYJ6vnc2e35CzyZNRnmh1fvm91Jz", "pub_key2": "DCT7G7KeUnMPVKXN2y8M7BnyosLRE3LtSnNp7kbxtYd9xHiBoX6wd" } 

3. new public signing key

{ "brain_priv_key3": "DECESS LABBA PLAN DEHUSK FISTY MOSSER SPURTER SCORIAE INDART UNDYE MASTER STEIGH SAFROLE FLURR THAPSIA JOB", "wif_priv_key3": "5JgMsecySgt2BQsmmEE9QnwAGuudC9fGeZJhreyPatcu2TVY9bs", "pub_key3": "DCT6D7TLeVJmPQWR73XHvEhTVHzTDoG6oTSUyvfGa58nuc5wL96UH" } 

7. CREATE your new account

register_account new_username pub_key1 pub_key2 decentgo_username true 

8. SEND some DCT to your new account

transfer decentgo_username target_username 3.00 DCT "memo" true 

9. IMPORT the new account

import_key new_username wif_priv_key2 

10. Close the Wallet and edit the config.ini inside /root/.decent/data/decentd/

private-key = ["pub_key2","wif_priv_key2"] 

11. Launch again and create your miner

create_miner username "proposal URL" true 

12. Change your signing key to 3rd keypair from suggest_brain_key

update_miner username "proposal URL" public_key3 true 

13. Edit the config.ini again inside /root/.decent/data/decentd/

enable-stale-production = true miner-id = "1.4.X" private-key = ["pub_key3","wif_priv_key3"] 

Your Server is now ready to run a DECENT witness.

Be aware that you should not close your daemon at any time.

V - USEFUL COMMANDS

get_brain_key_info dump_private_keys get_private_key public-key get_account texxi get_miner texxi list_my_accounts list_account_balances texxi set_desired_miner_count username 99 

Now get some support for your miner and join the community!

https://decent-project.slack.com/

You can vote for me and I will gladly return the favor. Please make sure your server runs stable and you're not missing any blocks. Good Luck!

vote_for_miner username texxi true true

All voters will receive early preview access to my first cryptocurrency trading tool to be released in 2018. But remember: Always trade for good and invest in green.

submitted by Texxer to Decentplatform [link] [comments]

[P2pool] How to make your own personal p2pool Node!

Tired of getting no block rewards and sending many dead shares? Need a p2pool node close to your miner? MAKE YOUR OWN! :D
And, Yep, P2pools give 0.5% Rewards to block finders!
Here's some info about p2ools: http://whatisp2pool.com/
The stronger the P2Pool network becomes the more resistant the digibyte network is to 51% attacks!
Oh and, P2pools are DDOS proof! Now that's News! So if your node gets DDOS'd .. you dont lose your shares as the shares have been saved in the p2pool, its called the sharechain. So you get paid anyhow! Thanks to the p2pool network. and you ccan set your workers to another pool using the "--failover only" command in cgminer (if im not wrong) and get it back to work on the p2pool network!
TL;DR; P2POOL = 1 Big fat network Decentrazlized pool!
STEPS TO MAKE A P2POOL:
Install Ubuntu server or Desktop if you want http://www.ubuntu.com/download/ or u can use a VPS (VirtualPrivateServer -- Link Below with coupon code)
So Let's start off in the command line (Open Terminal.. and all you have to do is Cut, Copy Paste! ;) )
Start by updating and upgrading Ubuntu, you know you want the best ;)
sudo apt-get update sudo apt-get upgrade sudo apt-get install python-software-properties sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update 
Time for the DigiByteProject dependencies!
sudo apt-get install build-essential libboost-all-dev libcurl4-openssl-dev libdb5.1-dev libdb5.1++-dev git qt-sdk libminiupnpc-dev sudo apt-get install qrencode libqrencode-dev 
And, Now to compile DigiByte on your system!
git clone git://github.com/digibyte/DigiByteProject.git digibyte #renaming makes it easier ;) cd ~/digibyte/src mkdir obj make -f makefile.unix USE_UPNP=- sudo cp digibyted /usbin cd ~ 
After it has compiled try running 'digibyted'
./digibyte/src/digibyted 
If you get an error saying you need to make the digibyte.conf file, good! :) If it doesnt give you that error, make sure you followed the compiling steps appropriately.
So, Lets create the conf file here...
cd .digibyte #edited from 'digibyted' .. fixed!! nano digibyte.conf 
Paste the following, CHANGING THE USERNAME AND PASS!! make sure to take note of both, you'll need these later!
rpcuser=CHANGEusername rpcpassword=ChangePassword daemon=1 server=1 rpcport=14022 port=12024 gen=1 rpcallowip=127.0.0.1 addnode=74.208.230.160 addnode=31.220.25.91 addnode=184.155.218.183 addnode=24.119.23.61 addnode=70.196.193.231 addnode=198.98.118.241 addnode=142.4.204.115 addnode=23.90.191.58 addnode=216.250.125.121 addnode=115.28.31.25 addnode=83.172.105.46 
Press 'CTRL' + ' X', and then 'Y' to save when prompted
cd ~ ./digibyte/src/digibyted ./digibyte/src/digibyted getinfo 
Make sure you check the latest block in the block chain or on your local DigiByte Wallets. This is to see how far your p2pool node has gotten! This is gonna take quite a while so lets CONTINUE!
Let's get the p2pool software and frontend in! Install the p2pool dependencies!
sudo apt-get install python-zope.interface python-twisted python-twisted-web git clone https://github.com/Rav3nPL/p2pool-rav p2pool #renaming it! cd ~/p2pool/digibyte_subsidy #Thanks to Chaeplin sudo python setup.py install 
Time to edit and customise the html code to personalise your p2pool's frontend. Feel free to change the p2pool name and if you're an advanced user, feel free to add your own frontend from git hub after removing the web-static folder. (OPTIONAL: by using rm -f -r web-static #in that directory. And then you can choose whichever frontend you want! by cloning it in the web-static folder)
Editing the current frontend html!
cd .. cd web-static nano index.html 
After personalising the page, i.e. changing the p2pool name and adding some info! Lets go back and check how far the block downloading has gotten! You can check this by typing this in the command line after going back to the root directory:
cd ~ ./digibyte/src/digibyted getinfo 
This is gonna take a while so might as well check for updates again :P
sudo apt-get update sudo apt-get upgrade 
After making sure that all the blocks have been synced locally! We're ready to run the p2pool node! Simply enter the string below in the command line, entering your USERNAME and PASS that you saved earlier!
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 
If you want to charge a fee for your node add this to your string, adding your fee address!:
--fee 1.0 --address NEWDGBADDRESS 
To see if the node is up and running enter this in the command line:
screen -x myp2pool 
'CTRL' + 'A' + 'D' to close the terminal if you press 'CTRL' + 'C', it will terminate the p2pool program and you'll have to restart the pool by using the string above!
Once, Everything is setup as planned! Check your p2pool node's ip Address by entering this into the command line:
ifconfig 
inet addr: 192.168.1.1 #You'll see a line like this.
So, Your cgminer string should look something like this:
cgminer --scrypt -o 192.168.1.1:9022 -u DGBADDRESS -p x
And your p2pool WEB ADDRESS should look like this:
192.168.1.1:9022
example: http://192.168.1.1:9022/
You can monitor your p2pool using that web address! Enjoy, your personal p2pool node!! :D
If for whatever reason the server shuts off and you need to restart the p2pool node, you should run digibyted again and after it has synced successfully, just type in your p2pool string:
./digibyte/src/digibyted
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 --fee 1.0 --address NEWADDRESS
PRESS CTRL + A + D to Detach from screen
UPDATE Follow Guide below if you used this guide before DigibByte v2.0 was released (28th Feb 2014)
You must check whether you're on the right ShareChain. Make Sure the block Value says 7960!
https://bitcointalk.org/index.php?topic=408268.msg5440858#msg5440858
This Tutorial was made with the help of an existing Guide: http://doges.org/index.php?topic=5586.0 Kudos to crypto49er!
If you want to do this on a VPS:
Here's a link to a VPS hosting site:
https://www.digitalocean.com/
Feel free to use my $10 ref. code -- it doesnt really make a difference, though.
https://www.digitalocean.com/?refcode=dc909c442664
Let me know if this guide helped!
submitted by StormMiner to Digibyte [link] [comments]

Compiling from Source on a small USBArmory/RasPi (Debian)

As with other users running a full node on a small memory device (Raspberry pi, USBArmory and others) I was encountering frequent crashes and had to make a script dedicated to restarting bitcoind when it happened. Among other neat things, v0.12.0 brought the much required feature: Crash Prevention via Memory Pool Limits. This quick tutorial (or rather list of commands) allows anyone to compile bitcoind (no wallet, no GUI) and therefore run a full node on these cheap devices: - apt-get install git - git clone https://github.com/bitcoin/bitcoin.git - apt-get install build-essential - wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz - tar -xvf db-4.8.30.NC.tar.gz - cd db-4.8.30.NC/build_unix/ - mkdir -p build - BDB_PREFIX=$(pwd)/build - ../dist/configure --disable-shared --enable-cxx --with-pic --prefix=$BDB_PREFIX - make install - cd ../.. - apt-get install autoconf libboost-all-dev libssl-dev libprotobuf-dev protobuf-compiler libqrencode-dev libtool pkg-config pkgconf libevent-dev - cd bitcoin - git checkout v0.12.0 - ./autogen.sh - ./configure --disable-wallet CXXFLAGS="--param ggc-min-expand=1 --param ggc-min-heapsize=32768" CPPFLAGS="-I${BDB_PREFIX}/include/ -O2" LDFLAGS="-L${BDB_PREFIX}/lib/" --without-gui - make - make install ... and in case you need it, how to make a 1GB swap file: - free - dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 - mkswap /vaswap.img - swapon /vaswap.img - free - make -f makefile.unix You'll obviously need at least a 128GB (micro) sd card to operate a node. Here's the script to start and check that bitcoind is working: - #!/bin/bash - until /uslocal/bin/bitcoind -daemon -rescan -maxmempool=300; do - echo "Server 'bitcoind' crashed with exit code $?. Respawning.." -&2 - sleep 10 - done To launch it at boot, simply type "crontab -e" and add the line: @reboot /linktoyourshscript Hope that helps! edit: Sorry for the poor formatting, all guides that I seem to find don't work...
submitted by limpkin to Bitcoin [link] [comments]

Makefile For Golang - Tutorial How to create a bitcoin wallet  Beginners Tutorial  BTC ... How to make money from Bitcoin? - YouTube Makefile Tutorials Basics : 001 : Introduction and ... Basic tutorial on Makefile

To follow this tutorial, basic Linux/Unix command line experience is recommended, but probably not a requirement. Here be dragons! Note that Bitcoin technology is generally experimental, and so is this tutorial, so don't use any significant amount of BTC with any system that you setup while following this tutorial. Also note that the relatively weak system that forms a Raspberry Pi 1 or 2, may ... Recommended UNIX and Linux books. If you wish to continue learning Unix, here is a list of good Unix and Linux books, ranging from beginners to advanced.; Download. This tutorial is available for download so you can work offline. UNIX Tutorial Seven 7.1 Compiling UNIX software packages . We have many public domain and commercial software packages installed on our systems, which are available to all users. However, students are allowed to download and install small software packages in their own home directory, software usually only useful to them personally. There are a number of steps needed to install the software ... Makefile is good. However I want to build my makefiles just as regular bash scripts. Eg: Think that I wrote a bash script very quickly with the following content: #!/bin/bash echo "hello" cd ~ do-some-work.sh my-parameter I can run this script with $ ./my-important-task.sh. If I wanted to move that script into makefile, I should do the following: make -f makefile.unix bitcoin If you want to compile the bitcoin daemon, the command is: make -f makefile.unix bitcoind If everything went well there will be a file called “bitcoin” in the current directory. I suggest copying the file to “/usr/local/bin” and making sure it’s owned as root with the permissions 755 so that no one but root can modify it. If this article helped you out ...

[index] [26842] [22380] [37762] [12383] [44347] [38354] [26771] [47054] [25949] [12889]

Makefile For Golang - Tutorial

How to make money from Bitcoin?This video expains in detail how to get started in making money through bitcoin. Follow me on Facebook https://www.facebook.co... A simple tutorial on how to use the makefile in console environment under Linux. The tutorial should be good enough for starters who are not familiar with ma... Simple tutorial for beginners about how to create a cryptocurrency wallet and securely back up Bitcoin and Bitcoin Cash funds. BTC.com is a cryptocurrency wa... Makefile For Golang - Tutorial Blue Bot. Loading... Unsubscribe from Blue Bot? ... Basic example for using Unix based make utility with a makefile building a simple golang program. Installing make ... This basic tutorial on Makefile explains how to write a very basic makefile.

#